Specialized Stumpjumper EVO Comp Carbon S1 Arctic Blue / Black

$7,600.00
Availability: In stock

In order to bring EVO fun to the masses, we took our FACT 11m carbon frame (yes, the same one as the S-Works), dressed it with a bullet-proof SRAM GX Eagle 12-speed drivetrain and a tough as nails set of alloy wheels, and set it loose to shred unsuspecting trails everywhere.

  • All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
  • The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
  • Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
  • We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

 

Stumpjumper EVO Comp Technical Specifications

FRAMESET

Frame

FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

SWAT

Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder

Seat Binder

Alloy, 38.6mm

SUSPENSION

Rear Shock

FOX FLOAT X Performance, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSR adjustment, S1:210x50mm, S2-S6:210x55mm

Fork

FOX FLOAT 36 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm QR axle, 44mm offset, S1:150mm of travel, S2-S6:160mm of travel

COCKPIT

Stem

Alloy Trail Stem, 35mm bar bore

Handlebars

Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm width

Tape

Specialized Trail Grips

Saddle

Bridge Comp, Hollow Cr-mo rails, 155/143mm

SeatPost

X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm

BRAKES

Front Brake

SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm

Rear Brake

SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm

DRIVETRAIN

Rear Derailleur

SRAM GX Eagle, 12-speed

Shift Levers

SRAM GX Eagle Trigger, 12-speed

Cassette

SRAM XG-1275, 12-speed, 10-52t

Chain

SRAM NX Eagle, 12-speed

Crankset

SRAM X1 6K, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm

Chainrings

Alloy, 30T

Bottom Bracket

SRAM DUB, BSA 73mm, threaded

WHEELS

Rims

Specialized 29, hookless alloy, 30mm inner width, tubeless ready

Front Hub

Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h

Rear Hub

Alloy, sealed cartridge bearings, 148mmx12mm thru-axle, 28h

Spokes

DT Swiss Industry

Front Tire

Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"

Rear Tire

Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3"

Inner Tubes

Standard, Presta valve

* Specifications are subject to change without notice

 

Stumpjumper EVO Comp Geometry

  S1 S2 S3 S4 S5 S6
Crank Length 165mm 170mm 170mm 170mm 170mm 175mm
Handlebar Width 800mm 800mm 800mm 800mm 800mm 800mm
Stem Length 40mm 40mm 50mm 50mm 50mm 50mm
Saddle Width 155mm 155mm 143mm 143mm 143mm 143mm
Seatpost Length 100mm 125mm 150mm 170mm 170mm 190mm
Stack 613mm 617mm 626mm 635mm 644mm 654mm
Reach 408mm 428mm 448mm 475mm 498mm 528mm
Headtube Length 95mm 95mm 105mm 115mm 125mm 135mm
Headtube Angle 64.5° 64.5° 64.5° 64.5° 64.5° 64.5°
BB Height 335mm 340mm 340mm 340mm 340mm 340mm
BB Drop 40mm 35mm 35mm 35mm 35mm 35mm
Trail 131mm 131mm 131mm 131mm 131mm 131mm
Fork Length (full) 561mm 571mm 571mm 571mm 571mm 571mm
Fork Rake/Offset 44mm 44mm 44mm 44mm 44mm 44mm
Front Centre 732mm 756mm 780mm 809mm 838mm 873mm
Chainstay Length 438mm 438mm 438mm 438mm 448mm 448mm
Wheelbase 1167mm 1191mm 1216mm 1247mm 1285mm 1319mm
Top-tube Length (horizontal) 538mm 564mm 590mm 623mm 647mm 679mm
Bike Standover Height 733mm 764mm 763mm 762mm 767mm 770mm
Seat Tube Length 385mm 385mm 405mm 425mm 445mm 465mm
Seat Tube Angle 78° 77.6° 77.2° 76.9° 77° 77°
Max Seatpost Insertion 180mm 180mm 200mm 220mm 240mm 260mm
Min Seatpost Insertion 80mm 80mm 80mm 80mm 80mm 80mm
0 stars based on 0 reviews